"Experience Quality Horsepower" 

Phone: 317-335-2491          Fax: 317-335-2391          Email: engine@gochampion.com  
   


HomeRace EnginesStreet EnginesBudget EnginesEngine DiapersCylinder HeadsCylinder BlocksRotating Assembly

Contact InfoAbout UsTestimonialsUpper End KitsDyno ServicesEngine PartsMonthly Special

We are a supplier for the following companies: ARP, ATI, BRODIX, CALLIES, COMP CAMS, DART, EARLS PRODUCTS, FEL-PRO, GOODRIDGE PLUMBING, JESEL, MANLEY, MOROSO, OLIVER, QUICK FUEL, T&D, WORLD PRODUCTS and many other suppliers. Call us at 317-335-2491 so we can assist you with your engine product questions.

 

Brodix Small Block Cylinder Head Options


IK Series Race Rite Track 1 -8 -10 -11 -10X -10RI -11X -12
-15 -16 -18C -18X 12X12 GB2000 BD Series Canted

If you do not see the cylinder head you are looking for, please call us at 317-335-2491 and we will be happy to assist you.


Track 1 Cylinder Head Information

Cylinder Head Bare Cylinder Head Price Complete Cylinder Heads
Track 1 $939.00   pair From $1415.00 pair
Track 1X $1095.00 pair From $1807.00 pair
STS T1 215 $2080.00 pair From $2582.00 pair
KC T1 227 Call For Pricing From $2582.00 pair

The BRODIX Track 1 has a 221 cc intake port and a 67 cc combustion chamber. This head was designed for the drag or oval track racer who wants a lighter weight cylinder head that can make a significant difference in horsepower. The BRODIX Track 1 has a very thick deck that is compatible with nitrous, and comes with phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel.

The BRODIX Track 1X was designed as the next step above the Track 1. An additional 20 to 25 horsepower may be gained with this head out of the box over the traditional Track 1. BRODIX has incorporated improvements such as a 40/60 valve spacing, CNC machined combustion chambers, 2.100 intake valves, and new intake and exhaust ports. The 222 cc intake port flows over 285 cfm at 700 lift. The exhaust port flows over 195 cfm at 700 lift. Track 1X requires a T&D Economy or Jesel shaft system.

The BRODIX Track 1 is also available completely CNC ported. CNC porting ensures maximum consistency between each intake and exhaust port. No special components are required with the CNC ported BRODIX Track 1 head. This head is available in two intake port volumes. Exhaust ports accommodate a standard Chevy pattern only. The industry standard has been taken to the next level with modernizing CNC porting.

Part Number Intake Port CC Chamber Volume Plug Angle Application
Track 1 221 cc 67 cc Angle Oval Track, Drag Race, Pro Street
Track 1X 222 cc 68 cc Angle Oval Track, Bracket Racing, Pro Street
STS T1 215 215 cc 68 cc Angle Oval Track, Drag Race, Pro Street
KC T1 227 227 cc 68 cc Angle Oval Track, Drag Race

 

Prices are subject to change without notice.