"Experience Quality Horsepower"
Phone: 317-335-2491
Fax: 317-335-2391
Email: engine@gochampion.com
|
"Experience Quality Horsepower" |
|
|
|
Brodix Big Block Cylinder Head Options
If you do not see the cylinder head you are looking for, please call us at 317-335-2491 and we will be happy to assist you. BB-2X & BB-2 XTRA Series Cylinder Head Information
The BB-2 X head works well
with a light car or large engine (509-555 cu in). It has a 340 cc intake
port and flows over 360 cfm with only the bowls blended and the intake
ports matched to the gasket. The BB-2 X may be purchased angle milled to
110 cc or angle machined to 98 cc. The BB-2 XTRA head works well on a
540 cu in or larger engine. It has a 365 cc intake port and flows over
375 cfm with only the bowls blended and the intake ports matched to the
gasket. The BB-3 works well on a 540-605 cu in engine. It has a 370 cc
intake port and flows over 370 cfm, but may not be angle machined. While
creating the BB-2 XTRA CNC, the professionals at BRODIX invested many
long hours on the flow bench and at the track developing a completely
ported cylinder head. BRODIX incorporated this porting design into a
100% CNC ported masterpiece that can be mass produced. One of the most
accurate, best flowing out-of-the-box cylinder heads is now available.
Each of the castings flow within 1% of each other and are CNC ported to
a mirror finish. The bottom line is that our customers can now buy the
best casting with the best CNC porting at the best price. These cylinder
heads accept all standard pistons, intake manifolds, and rocker arms.
The exhaust ports are raised .600 higher than stock. Valve cover rails
are now raised to assure no oil leakage.
Prices are subject to change without notice.
|
